Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
Ethos 170 Series Light Duty Nylon Wheels 171 NOA 050 T09 is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 050 T09 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Characteristics of Ethos 170 series light-duty Nylon wheels 171 NOA 050 T09
Ethos 170 Series Light Duty Nylon Casters 171 NOA 050 T09 is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels are able to withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly and move smoothly, and will not age
If the diameter is the same, then Ethos Nylon plastic wheels 171 NOA 050 T09 can withstand loads 3 times heavier than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and resistant to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos Nylon Wheels 171 NOA 050 T09 does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Detailed structure of Ethos Nylon Wheel 171 NOA 050 T09
2. Advantages of Ethos 170 series light duty Nylon wheels171 NOA 050 T09
Ethos 170 Series Light Duty Nylon Casters 171 NOA 050 T09 has the following outstanding advantages:
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because it is not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load-bearing capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Use the right load-bearing wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment Do not use the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h.
If you want to own the product Ethos 170 series light-duty Nylon wheels 171 NOA 050 T09 then quickly contact us to place an order today!
Ethos 170 Series Light Duty Nylon Wheels 171 NOA 050 T09 is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 050 T09 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Characteristics of Ethos 170 series light-duty Nylon wheels 171 NOA 050 T09
Ethos 170 Series Light Duty Nylon Casters 171 NOA 050 T09 is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels are able to withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly and move smoothly, and will not age
If the diameter is the same, then Ethos Nylon plastic wheels 171 NOA 050 T09 can withstand loads 3 times heavier than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and resistant to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos Nylon Wheels 171 NOA 050 T09 does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Detailed structure of Ethos Nylon Wheel 171 NOA 050 T09
2. Advantages of Ethos 170 series light duty Nylon wheels171 NOA 050 T09
Ethos 170 Series Light Duty Nylon Casters 171 NOA 050 T09 has the following outstanding advantages:
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because it is not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load-bearing capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Use the right load-bearing wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment Do not use the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h.
If you want to own the product Ethos 170 series light-duty Nylon wheels 171 NOA 050 T09 then quickly contact us to place an order today!
Ethos 171 NOA 050 T09 Light Duty 170 Series Nylon Wheel
Ethos 170 Series Light Duty Nylon Wheels 171 NOA 050 T09 is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 050 T09 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Characteristics of Ethos 170 series light-duty Nylon wheels 171 NOA 050 T09
Ethos 170 Series Light Duty Nylon Casters 171 NOA 050 T09 is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels are able to withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly and move smoothly, and will not age
If the diameter is the same, then Ethos Nylon plastic wheels 171 NOA 050 T09 can withstand loads 3 times heavier than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and resistant to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos Nylon Wheels 171 NOA 050 T09 does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Detailed structure of Ethos Nylon Wheel 171 NOA 050 T09
2. Advantages of Ethos 170 series light duty Nylon wheels171 NOA 050 T09
Ethos 170 Series Light Duty Nylon Casters 171 NOA 050 T09 has the following outstanding advantages:
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because it is not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load-bearing capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Use the right load-bearing wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment Do not use the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h.
If you want to own the product Ethos 170 series light-duty Nylon wheels 171 NOA 050 T09 then quickly contact us to place an order today!
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
