Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
The Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheel is designed to be fixed and quite sturdy. The wheel is widely used in workshops and factories to transport goods and raw materials. The trolley wheel plays a very important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 075 T10 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 171 NOA 075 T10 light duty 170 series Nylon wheels
Ethos 171 NOA 075 T10 light duty 170 series Nylon wheels are resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly, move smoothly, and will not age
If the diameter is the same, Ethos Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon 171 NOA 075 T10 wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 171 NOA 075 T10 Nylon Wheel does not leave marks on the floor, and is commonly used in factories that process and produce seafood, food, pharmaceuticals, cold storage, freezers, laboratories, and have high requirements for food hygiene and safety.
Detailed structure of Ethos 171 NOA 075 T10 Nylon Wheel
2. Advantages of Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheels
Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheels have the following outstanding advantages:
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because they are not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Use the right load capacity for the cart.
- Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment vehicle properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the vehicle too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
If you want to own the product Ethos 171 NOA 075 T10 Light Duty 170 Series Nylon Wheel, please quickly contact us for advice and order today.
The Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheel is designed to be fixed and quite sturdy. The wheel is widely used in workshops and factories to transport goods and raw materials. The trolley wheel plays a very important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 075 T10 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 171 NOA 075 T10 light duty 170 series Nylon wheels
Ethos 171 NOA 075 T10 light duty 170 series Nylon wheels are resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly, move smoothly, and will not age
If the diameter is the same, Ethos Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon 171 NOA 075 T10 wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 171 NOA 075 T10 Nylon Wheel does not leave marks on the floor, and is commonly used in factories that process and produce seafood, food, pharmaceuticals, cold storage, freezers, laboratories, and have high requirements for food hygiene and safety.
Detailed structure of Ethos 171 NOA 075 T10 Nylon Wheel
2. Advantages of Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheels
Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheels have the following outstanding advantages:
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because they are not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Use the right load capacity for the cart.
- Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment vehicle properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the vehicle too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
If you want to own the product Ethos 171 NOA 075 T10 Light Duty 170 Series Nylon Wheel, please quickly contact us for advice and order today.
Ethos 171 NOA 075 T10 Light Duty 170 Series Nylon Wheel
The Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheel is designed to be fixed and quite sturdy. The wheel is widely used in workshops and factories to transport goods and raw materials. The trolley wheel plays a very important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 075 T10 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 171 NOA 075 T10 light duty 170 series Nylon wheels
Ethos 171 NOA 075 T10 light duty 170 series Nylon wheels are resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly, move smoothly, and will not age
If the diameter is the same, Ethos Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon 171 NOA 075 T10 wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 171 NOA 075 T10 Nylon Wheel does not leave marks on the floor, and is commonly used in factories that process and produce seafood, food, pharmaceuticals, cold storage, freezers, laboratories, and have high requirements for food hygiene and safety.
Detailed structure of Ethos 171 NOA 075 T10 Nylon Wheel
2. Advantages of Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheels
Ethos 171 NOA 075 T10 light-duty 170 series Nylon wheels have the following outstanding advantages:
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because they are not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Use the right load capacity for the cart.
- Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment vehicle properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the vehicle too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
If you want to own the product Ethos 171 NOA 075 T10 Light Duty 170 Series Nylon Wheel, please quickly contact us for advice and order today.
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
