Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
The Ethos 253NIY100H10 medium-duty 250 series nylon wheel with brake axle can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals... Ethos 253NIY100H10 plays an important role, often used in workshops and factories to transport goods and raw materials, helping to minimize manual activities, reduce human effort and save time and costs in production.
1. Features of Ethos 253NIY100H10 Nylon Wheel
Ethos Wheel 253NIY100H10 is a medium-duty wheel with a rotating shaft and brakes, made from Nylon material that is resistant to water, gasoline, grease and some other chemicals... Low coefficient of friction, long-lasting wear and light movement, no marks on the floor,
Nylon wheels are commonly used in factories processing, producing seafood, food, pharmaceuticals, cold storage, laboratories,... Places with high requirements for food hygiene and safety. However, due to the hard material, this type of banh xe will cause quite a lot of noise when running, so this wheel should be used in places with smooth floor surfaces or for carts that often carry heavy loads.
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. The product is commonly used in industry because it is easy to roll and difficult to wear.
Ethos 253NIY100H10
2. Advantages of Ethos Nylon Wheels 253NIY100H10
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees C.
3. Notes when using Ethos 253NIY100H10 Nylon Wheels
- Should use banh xe trolley with the correct load.
- Limit leaving the cart outdoors in the sun and rain to reduce the lifespan of banh xe.
- Based on the environment to use the wheel properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall, the speed should not exceed 4-5 km/h.
The Ethos 253NIY100H10 medium-duty 250 series nylon wheel with brake axle can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals... Ethos 253NIY100H10 plays an important role, often used in workshops and factories to transport goods and raw materials, helping to minimize manual activities, reduce human effort and save time and costs in production.
1. Features of Ethos 253NIY100H10 Nylon Wheel
Ethos Wheel 253NIY100H10 is a medium-duty wheel with a rotating shaft and brakes, made from Nylon material that is resistant to water, gasoline, grease and some other chemicals... Low coefficient of friction, long-lasting wear and light movement, no marks on the floor,
Nylon wheels are commonly used in factories processing, producing seafood, food, pharmaceuticals, cold storage, laboratories,... Places with high requirements for food hygiene and safety. However, due to the hard material, this type of banh xe will cause quite a lot of noise when running, so this wheel should be used in places with smooth floor surfaces or for carts that often carry heavy loads.
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. The product is commonly used in industry because it is easy to roll and difficult to wear.
Ethos 253NIY100H10
2. Advantages of Ethos Nylon Wheels 253NIY100H10
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees C.
3. Notes when using Ethos 253NIY100H10 Nylon Wheels
- Should use banh xe trolley with the correct load.
- Limit leaving the cart outdoors in the sun and rain to reduce the lifespan of banh xe.
- Based on the environment to use the wheel properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall, the speed should not exceed 4-5 km/h.
250 series Nylon wheel medium load spindle with brake Ethos 253NIY100H10
The Ethos 253NIY100H10 medium-duty 250 series nylon wheel with brake axle can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals... Ethos 253NIY100H10 plays an important role, often used in workshops and factories to transport goods and raw materials, helping to minimize manual activities, reduce human effort and save time and costs in production.
1. Features of Ethos 253NIY100H10 Nylon Wheel
Ethos Wheel 253NIY100H10 is a medium-duty wheel with a rotating shaft and brakes, made from Nylon material that is resistant to water, gasoline, grease and some other chemicals... Low coefficient of friction, long-lasting wear and light movement, no marks on the floor,
Nylon wheels are commonly used in factories processing, producing seafood, food, pharmaceuticals, cold storage, laboratories,... Places with high requirements for food hygiene and safety. However, due to the hard material, this type of banh xe will cause quite a lot of noise when running, so this wheel should be used in places with smooth floor surfaces or for carts that often carry heavy loads.
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. The product is commonly used in industry because it is easy to roll and difficult to wear.
Ethos 253NIY100H10
2. Advantages of Ethos Nylon Wheels 253NIY100H10
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees C.
3. Notes when using Ethos 253NIY100H10 Nylon Wheels
- Should use banh xe trolley with the correct load.
- Limit leaving the cart outdoors in the sun and rain to reduce the lifespan of banh xe.
- Based on the environment to use the wheel properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall, the speed should not exceed 4-5 km/h.
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
