Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
Ethos 256NIY075H13 medium-duty nylon wheel with brake shaft 250 series is widely used in workshops and factories to transport goods and raw materials, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 256NIY075H13 is made of nylon plastic so it can operate in many different environments such as water, gasoline, light chemical environments...
1. Features of Ethos 256NIY075H13 Nylon Wheel
Ethos 256NIY075H13 Wheel is a medium-duty wheel line, made from Nylon material, providing resistance to water, gasoline, grease and some other chemicals... Low coefficient of friction, long-lasting wear and light movement, no marks on the floor.
The product is commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, laboratories,... Places with high requirements for food hygiene and safety. However, due to the hard material, this type of wheel will cause quite a lot of noise when running, so this wheel should be used in places with smooth floor surfaces or for carts that often carry heavy loads.
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. Ethos 256NIY075H13 is commonly used in industry due to its easy rolling and resistance to abrasion.
Ethos 256NIY075H13 Nylon Wheel
2. Advantages of Ethos Nylon Wheels 256NIY075H13
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Used for low-lift forklifts, high-lift forklifts, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees C.
3. Notes when using Ethos Nylon Wheels 256NIY075H13
- Should use wheel cart with the correct load.
- Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel properly depending on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h
Ethos 256NIY075H13 medium-duty nylon wheel with brake shaft 250 series is widely used in workshops and factories to transport goods and raw materials, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 256NIY075H13 is made of nylon plastic so it can operate in many different environments such as water, gasoline, light chemical environments...
1. Features of Ethos 256NIY075H13 Nylon Wheel
Ethos 256NIY075H13 Wheel is a medium-duty wheel line, made from Nylon material, providing resistance to water, gasoline, grease and some other chemicals... Low coefficient of friction, long-lasting wear and light movement, no marks on the floor.
The product is commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, laboratories,... Places with high requirements for food hygiene and safety. However, due to the hard material, this type of wheel will cause quite a lot of noise when running, so this wheel should be used in places with smooth floor surfaces or for carts that often carry heavy loads.
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. Ethos 256NIY075H13 is commonly used in industry due to its easy rolling and resistance to abrasion.
Ethos 256NIY075H13 Nylon Wheel
2. Advantages of Ethos Nylon Wheels 256NIY075H13
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Used for low-lift forklifts, high-lift forklifts, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees C.
3. Notes when using Ethos Nylon Wheels 256NIY075H13
- Should use wheel cart with the correct load.
- Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel properly depending on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h
Ethos 256NIY075H13 Medium Duty 250 Series Nylon Wheel Swivel with Brake
Ethos 256NIY075H13 medium-duty nylon wheel with brake shaft 250 series is widely used in workshops and factories to transport goods and raw materials, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 256NIY075H13 is made of nylon plastic so it can operate in many different environments such as water, gasoline, light chemical environments...
1. Features of Ethos 256NIY075H13 Nylon Wheel
Ethos 256NIY075H13 Wheel is a medium-duty wheel line, made from Nylon material, providing resistance to water, gasoline, grease and some other chemicals... Low coefficient of friction, long-lasting wear and light movement, no marks on the floor.
The product is commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, laboratories,... Places with high requirements for food hygiene and safety. However, due to the hard material, this type of wheel will cause quite a lot of noise when running, so this wheel should be used in places with smooth floor surfaces or for carts that often carry heavy loads.
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. Ethos 256NIY075H13 is commonly used in industry due to its easy rolling and resistance to abrasion.
Ethos 256NIY075H13 Nylon Wheel
2. Advantages of Ethos Nylon Wheels 256NIY075H13
- Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, cold storage.
- Used for low-lift forklifts, high-lift forklifts, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees C.
3. Notes when using Ethos Nylon Wheels 256NIY075H13
- Should use wheel cart with the correct load.
- Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel properly depending on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
