Add to cart successfully!
7 ngày miễn phí trả hàngHoàn tiền sau 7 - 14 ngày
100% genuine product
The Ethos 251NIY125P01 medium load nylon wheel series 250 is designed to be fixed and quite sturdy. The wheel is widely used in workshops and factories to transport goods and materials. The cart wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production. Ethos 251NIY075H10 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with mild chemicals...
Ethos is an OEM cart wheel brand of Singarpo in combination with manufacturing partners from Germany, USA, Japan, Korea, Taiwan, China. Ethos has 9 main product lines, serving all wheel usage needs from very light duty casters to very heavy duty casters.
1. Features of Ethos 251NIY125P01 medium duty 250 series Nylon casters
Ethos Medium Load Nylon Caster is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand medium loads, are waterproof, have a low coefficient of friction, will wear out slowly and move smoothly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 251NIY125P01 Medium Load Nylon Wheel Series 250 does not leave marks on the floor, commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Ethos 251NIY125P01 spindle medium load 250 series Nylon wheel
2. Advantages of Ethos 251NIY125P01 Medium Load Nylon Wheel Series 250
Ethos Nylon Wheel is made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
Because it is not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
The life of Nylon can be up to several decades.
Nylon is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.
Working temperature range up to + 80 degrees C.
3. Notes when using Nylon wheels 250 series medium load Ethos 251NIY125P01 shaft
Use the right load capacity caster.
Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
Use the wheel properly based on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors,...
Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
The Ethos 251NIY125P01 medium load nylon wheel series 250 is designed to be fixed and quite sturdy. The wheel is widely used in workshops and factories to transport goods and materials. The cart wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production. Ethos 251NIY075H10 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with mild chemicals...
Ethos is an OEM cart wheel brand of Singarpo in combination with manufacturing partners from Germany, USA, Japan, Korea, Taiwan, China. Ethos has 9 main product lines, serving all wheel usage needs from very light duty casters to very heavy duty casters.
1. Features of Ethos 251NIY125P01 medium duty 250 series Nylon casters
Ethos Medium Load Nylon Caster is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand medium loads, are waterproof, have a low coefficient of friction, will wear out slowly and move smoothly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 251NIY125P01 Medium Load Nylon Wheel Series 250 does not leave marks on the floor, commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Ethos 251NIY125P01 spindle medium load 250 series Nylon wheel
2. Advantages of Ethos 251NIY125P01 Medium Load Nylon Wheel Series 250
Ethos Nylon Wheel is made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
Because it is not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
The life of Nylon can be up to several decades.
Nylon is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.
Working temperature range up to + 80 degrees C.
3. Notes when using Nylon wheels 250 series medium load Ethos 251NIY125P01 shaft
Use the right load capacity caster.
Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
Use the wheel properly based on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors,...
Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
Nylon series 250 series medium load swivel wheel Ethos 251NIY125P01
The Ethos 251NIY125P01 medium load nylon wheel series 250 is designed to be fixed and quite sturdy. The wheel is widely used in workshops and factories to transport goods and materials. The cart wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production. Ethos 251NIY075H10 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with mild chemicals...
Ethos is an OEM cart wheel brand of Singarpo in combination with manufacturing partners from Germany, USA, Japan, Korea, Taiwan, China. Ethos has 9 main product lines, serving all wheel usage needs from very light duty casters to very heavy duty casters.
1. Features of Ethos 251NIY125P01 medium duty 250 series Nylon casters
Ethos Medium Load Nylon Caster is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand medium loads, are waterproof, have a low coefficient of friction, will wear out slowly and move smoothly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 251NIY125P01 Medium Load Nylon Wheel Series 250 does not leave marks on the floor, commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Ethos 251NIY125P01 spindle medium load 250 series Nylon wheel
2. Advantages of Ethos 251NIY125P01 Medium Load Nylon Wheel Series 250
Ethos Nylon Wheel is made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
Because it is not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
The life of Nylon can be up to several decades.
Nylon is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.
Working temperature range up to + 80 degrees C.
3. Notes when using Nylon wheels 250 series medium load Ethos 251NIY125P01 shaft
Use the right load capacity caster.
Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
Use the wheel properly based on the environment, such as not using the wheel at too high a temperature, or on rough or smooth floors,...
Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
7 ngày miễn phí trả hàngHoàn tiền sau 7 - 14 ngày
100% genuine product
Buy now
