Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
The 290 series Nylon wheel with medium load and Ethos 291NMH125T16 spindle is widely used in workshops and factories to transport goods and materials. The trolley wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production.
1. Features of Ethos 291NMH125T16 Nylon Wheel
Ethos Nylon Wheel is resistant to water, gasoline, grease and some other chemicals... can withstand medium loads, is waterproof, has a low coefficient of friction, will wear out slowly and move lightly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. The product does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth surfaces or for carts that often have to carry heavy loads.
Nylon Wheel Ethos 291NMH125T16
2. Advantages of Ethos 291NMH125T16 Nylon Wheels
Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
Because they are not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
The life of Nylon can be up to several decades.
Nylon is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.
Working temperature range up to + 80 degrees C.
3. Notes when using Nylon Wheel 291NMH125T16
Should use banh xe trolley with the correct load.
Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
Based on the environment to use the wheel properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h.
The 290 series Nylon wheel with medium load and Ethos 291NMH125T16 spindle is widely used in workshops and factories to transport goods and materials. The trolley wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production.
1. Features of Ethos 291NMH125T16 Nylon Wheel
Ethos Nylon Wheel is resistant to water, gasoline, grease and some other chemicals... can withstand medium loads, is waterproof, has a low coefficient of friction, will wear out slowly and move lightly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. The product does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth surfaces or for carts that often have to carry heavy loads.
Nylon Wheel Ethos 291NMH125T16
2. Advantages of Ethos 291NMH125T16 Nylon Wheels
Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
Because they are not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
The life of Nylon can be up to several decades.
Nylon is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.
Working temperature range up to + 80 degrees C.
3. Notes when using Nylon Wheel 291NMH125T16
Should use banh xe trolley with the correct load.
Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
Based on the environment to use the wheel properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h.
290 series Nylon wheel medium load spindle Ethos 291NMH125T16
The 290 series Nylon wheel with medium load and Ethos 291NMH125T16 spindle is widely used in workshops and factories to transport goods and materials. The trolley wheel plays a very important role, helping to reduce manual activities, reduce human effort and save time and costs in production.
1. Features of Ethos 291NMH125T16 Nylon Wheel
Ethos Nylon Wheel is resistant to water, gasoline, grease and some other chemicals... can withstand medium loads, is waterproof, has a low coefficient of friction, will wear out slowly and move lightly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand 3 times more load than rubber wheels. The product does not leave marks on the floor, commonly used in processing factories, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements on food hygiene and safety.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth surfaces or for carts that often have to carry heavy loads.
Nylon Wheel Ethos 291NMH125T16
2. Advantages of Ethos 291NMH125T16 Nylon Wheels
Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
Because they are not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
The life of Nylon can be up to several decades.
Nylon is widely used in industry due to its easy rolling, high load-bearing, high impact resistance and almost no aging.
Working temperature range up to + 80 degrees C.
3. Notes when using Nylon Wheel 291NMH125T16
Should use banh xe trolley with the correct load.
Limit leaving the cart outdoors in the sun and rain to reduce the life of the wheel.
Based on the environment to use the wheel properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
Do not push the cart too fast because it can easily cause it to fall. Speed not exceeding 4-5 km/h.
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
