Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
Ethos 174 NOA 075 P42 light-duty Nylon wheel is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a very important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 174 NOA 075 P42 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 174 NOA 075 P42 170 Series Light Duty Nylon Wheel with Brake
Ethos 174 NOA 075 P42 170 Series Light Duty Nylon Wheel with Brake is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand large loads, are waterproof, have a low coefficient of friction, will wear out slowly, move lightly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon 174 NOA 075 P42 wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 174 NOA 075 P42 light-duty Nylon wheel does not leave marks on the floor, is commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Structure of the Ethos 174 NOA 075 P42 Nylon Wheel
2. Advantages of Ethos 174 NOA 075 P42 light-duty nylon wheel with brake 170 series
Ethos 174 NOA 075 P42 light-duty nylon wheel with brake 170 series has the following outstanding advantages:
- Ethos nylon wheel is made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because it is not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Should use the right load capacity wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
Currently on the market, there are many types of nylon cart wheels, but Light-duty Nylon Wheels, 170 series, swivel shaft with brake, Ethos 174 NOA 075 P42 are very popular and trusted by many customers. If you want to own this quality product, contact us immediately. Committed to selling genuine products, high quality and reasonable prices for consumers.
Ethos 174 NOA 075 P42 light-duty Nylon wheel is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a very important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 174 NOA 075 P42 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 174 NOA 075 P42 170 Series Light Duty Nylon Wheel with Brake
Ethos 174 NOA 075 P42 170 Series Light Duty Nylon Wheel with Brake is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand large loads, are waterproof, have a low coefficient of friction, will wear out slowly, move lightly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon 174 NOA 075 P42 wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 174 NOA 075 P42 light-duty Nylon wheel does not leave marks on the floor, is commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Structure of the Ethos 174 NOA 075 P42 Nylon Wheel
2. Advantages of Ethos 174 NOA 075 P42 light-duty nylon wheel with brake 170 series
Ethos 174 NOA 075 P42 light-duty nylon wheel with brake 170 series has the following outstanding advantages:
- Ethos nylon wheel is made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because it is not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Should use the right load capacity wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
Currently on the market, there are many types of nylon cart wheels, but Light-duty Nylon Wheels, 170 series, swivel shaft with brake, Ethos 174 NOA 075 P42 are very popular and trusted by many customers. If you want to own this quality product, contact us immediately. Committed to selling genuine products, high quality and reasonable prices for consumers.
Ethos 174 NOA 075 P42 Series 170 Light Duty Nylon Swivel Wheel with Brake
Ethos 174 NOA 075 P42 light-duty Nylon wheel is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a very important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 174 NOA 075 P42 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 174 NOA 075 P42 170 Series Light Duty Nylon Wheel with Brake
Ethos 174 NOA 075 P42 170 Series Light Duty Nylon Wheel with Brake is resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand large loads, are waterproof, have a low coefficient of friction, will wear out slowly, move lightly, and will not age
If the diameter is the same, Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon 174 NOA 075 P42 wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos 174 NOA 075 P42 light-duty Nylon wheel does not leave marks on the floor, is commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Structure of the Ethos 174 NOA 075 P42 Nylon Wheel
2. Advantages of Ethos 174 NOA 075 P42 light-duty nylon wheel with brake 170 series
Ethos 174 NOA 075 P42 light-duty nylon wheel with brake 170 series has the following outstanding advantages:
- Ethos nylon wheel is made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because it is not compressed, when lifting and pulling goods, the vehicle moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using Nylon wheels
- Should use the right load capacity wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel based on the environment properly such as not using the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
Currently on the market, there are many types of nylon cart wheels, but Light-duty Nylon Wheels, 170 series, swivel shaft with brake, Ethos 174 NOA 075 P42 are very popular and trusted by many customers. If you want to own this quality product, contact us immediately. Committed to selling genuine products, high quality and reasonable prices for consumers.
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
