Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
Light-duty Nylon wheel series 170 swivel shaft Ethos 171 NOA 075 P42 is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 075 P42 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 171 NOA 075 P42 series 170 light duty nylon wheels
Ethos 171 NOA 075 P42 series 170 light duty nylon wheels are resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly, move smoothly, and will not age
If the diameter is the same, Ethos Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos Nylon wheels do not leave marks on the floor, are commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Detailed structure of Ethos 171 NOA 075 P42 series 170 swivel shaft light duty Nylon wheel
2. Advantages of Ethos 171 NOA 075 P42 series 170 swivel shaft light-duty Nylon wheels have many outstanding advantages as follows: - Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because they are not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using
- Should use the right load capacity wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel properly based on the environment such as do not use the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
If you want to own the product BLight-duty Nylon wheel series 170 Ethos 171 NOA 075 P42 swivel shaft, please contact us immediately for advice and order today!
Light-duty Nylon wheel series 170 swivel shaft Ethos 171 NOA 075 P42 is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 075 P42 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 171 NOA 075 P42 series 170 light duty nylon wheels
Ethos 171 NOA 075 P42 series 170 light duty nylon wheels are resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly, move smoothly, and will not age
If the diameter is the same, Ethos Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos Nylon wheels do not leave marks on the floor, are commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Detailed structure of Ethos 171 NOA 075 P42 series 170 swivel shaft light duty Nylon wheel
2. Advantages of Ethos 171 NOA 075 P42 series 170 swivel shaft light-duty Nylon wheels have many outstanding advantages as follows: - Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because they are not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using
- Should use the right load capacity wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel properly based on the environment such as do not use the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
If you want to own the product BLight-duty Nylon wheel series 170 Ethos 171 NOA 075 P42 swivel shaft, please contact us immediately for advice and order today!
Ethos 171 NOA 075 P42 Series 170 Light Duty Nylon Caster Wheel
Light-duty Nylon wheel series 170 swivel shaft Ethos 171 NOA 075 P42 is designed to be fixed and quite sturdy. Wheels are widely used in workshops and factories to transport goods and raw materials. Trolley wheels play a quite important role, helping to minimize manual activities, reduce human effort and save time and costs in production. Ethos 171 NOA 075 P42 is made of Nylon plastic. It can operate in many different environments such as: Water environment, gasoline environment, environment with light chemicals...
1. Features of Ethos 171 NOA 075 P42 series 170 light duty nylon wheels
Ethos 171 NOA 075 P42 series 170 light duty nylon wheels are resistant to water, gasoline, grease and some other chemicals..
Nylon wheels can withstand heavy loads, are waterproof, have a low coefficient of friction, will wear out slowly, move smoothly, and will not age
If the diameter is the same, Ethos Nylon plastic wheels can withstand loads 3 times higher than rubber wheels.
Nylon wheels are commonly used in industry because they are easy to roll and difficult to wear. However, due to the hard material, this type of wheel will cause quite a lot of noise when running. Therefore, it is not suitable for environments that require quietness. You should use this wheel in industrial areas with smooth floors or for carts that often have to carry heavy loads.
Ethos Nylon wheels do not leave marks on the floor, are commonly used in processing plants, seafood production, food, pharmaceuticals, cold storage, freezers, laboratories, with high requirements for food hygiene and safety.
Detailed structure of Ethos 171 NOA 075 P42 series 170 swivel shaft light duty Nylon wheel
2. Advantages of Ethos 171 NOA 075 P42 series 170 swivel shaft light-duty Nylon wheels have many outstanding advantages as follows: - Ethos nylon wheels are made from genuine white plastic with high durability and longevity, suitable for working in humid environments, water, and cold storage.
- Because they are not compressed, when lifting and pulling goods, the cart moves very smoothly. Nylon wheels are used for low-lift hand trucks, high-lift hand trucks, semi-automatic electric forklifts and other industrial equipment.
- The lifespan of Nylon can be up to several decades.
- Nylon is widely used in industry due to its ease of rolling, high load capacity, high impact resistance and almost no aging.
- Working temperature range up to + 80 degrees Celsius.
Notes when using
- Should use the right load capacity wheel.
- Limit leaving the vehicle outdoors in the sun and rain to reduce the life of the wheel.
- Use the wheel properly based on the environment such as do not use the wheel at too high a temperature, or on rough or smooth floors....
- Do not push the cart too fast because it can easily cause it to fall. Speed do not exceed 4-5 km/h.
If you want to own the product BLight-duty Nylon wheel series 170 Ethos 171 NOA 075 P42 swivel shaft, please contact us immediately for advice and order today!
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
