Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
The 3/4"-1" socket wrench model 6688A Koken 10301-KOK-0004 is made of high-quality steel, chrome-plated according to international standards, helping users easily convert the 3/4' standard slide wrench to be used with 1' standard socket heads.
1. 6688A Koken socket wrench
The socket wrench is an indispensable item in the process of repairing, assembling or manufacturing machinery, equipment, vehicles... because the socket wrench has high strength, durability, good load-bearing capacity, and is not deformed or warped during use. High-quality steel material, anti-rust, anti-corrosion and resistant to harsh working conditions such as oily and humid environments.
The tube surface is polished and chrome-plated to increase the aesthetics and durability of the product. The tube uses the standard metric system, is manufactured using advanced technology, achieves high precision, ensures aesthetics and long-term durability over time.
Koken 10301-KOK-000 tube connector is compact, flexible, easy to store and maintain management.
2. Shape of the 6688A Koken screw nut connector
The 3/4"-1" screw nut connector model 6688A Koken 10301-KOK-0004 is a harmonious combination that helps users operate easily, limiting the slippery condition when tightening the nut.
Most screw nut connectors are round, with concave notches inside the hole. This concave notch is used to create a connection with the nuts in the connector of the tightening lever, preventing the screw head from falling out of the connector of the tightening lever and making it easy to attach or remove. The corners of the connector are often slightly flared to make it easier to attach to the connector of the tightening lever.
Usually the length of the tube head will be proportional to the size of the connector and the cap, but sometimes the length of the tip will be longer than the length of the tip with the same parameters.
The Koken tube connector is very hard and rust-proof
Note
- Depending on the size of the bolt or nut, choose the appropriate type of tube and based on the height from the place where the bolt or nut is removed to the worker work surface to choose the appropriate length of the connector. When the crank length is not enough, you can install an additional connecting tube, but the connecting tube length must not exceed 500mm.
- To increase the disassembly speed, when the torque is less than 8 kGm, you can use a ratchet wrench to tighten the tube, but when the torque is 8 kGm or more, tighten it with a hard crank to avoid damaging the ratchet wrench.
- When using, the tube must be installed properly, not skewed, and must be close to the bolt or nut. When tightening, hold the crank and the tube or the joint of the connecting rod tightly with one hand, and slowly pull the crank toward the person tightening it with the other hand (avoid sudden jerks that can break the tube and cause accidents).
- When you need to measure the torque of a bolt or nut, use a force scale to check.
The 3/4"-1" socket wrench model 6688A Koken 10301-KOK-0004 is made of high-quality steel, chrome-plated according to international standards, helping users easily convert the 3/4' standard slide wrench to be used with 1' standard socket heads.
1. 6688A Koken socket wrench
The socket wrench is an indispensable item in the process of repairing, assembling or manufacturing machinery, equipment, vehicles... because the socket wrench has high strength, durability, good load-bearing capacity, and is not deformed or warped during use. High-quality steel material, anti-rust, anti-corrosion and resistant to harsh working conditions such as oily and humid environments.
The tube surface is polished and chrome-plated to increase the aesthetics and durability of the product. The tube uses the standard metric system, is manufactured using advanced technology, achieves high precision, ensures aesthetics and long-term durability over time.
Koken 10301-KOK-000 tube connector is compact, flexible, easy to store and maintain management.
2. Shape of the 6688A Koken screw nut connector
The 3/4"-1" screw nut connector model 6688A Koken 10301-KOK-0004 is a harmonious combination that helps users operate easily, limiting the slippery condition when tightening the nut.
Most screw nut connectors are round, with concave notches inside the hole. This concave notch is used to create a connection with the nuts in the connector of the tightening lever, preventing the screw head from falling out of the connector of the tightening lever and making it easy to attach or remove. The corners of the connector are often slightly flared to make it easier to attach to the connector of the tightening lever.
Usually the length of the tube head will be proportional to the size of the connector and the cap, but sometimes the length of the tip will be longer than the length of the tip with the same parameters.
The Koken tube connector is very hard and rust-proof
Note
- Depending on the size of the bolt or nut, choose the appropriate type of tube and based on the height from the place where the bolt or nut is removed to the worker work surface to choose the appropriate length of the connector. When the crank length is not enough, you can install an additional connecting tube, but the connecting tube length must not exceed 500mm.
- To increase the disassembly speed, when the torque is less than 8 kGm, you can use a ratchet wrench to tighten the tube, but when the torque is 8 kGm or more, tighten it with a hard crank to avoid damaging the ratchet wrench.
- When using, the tube must be installed properly, not skewed, and must be close to the bolt or nut. When tightening, hold the crank and the tube or the joint of the connecting rod tightly with one hand, and slowly pull the crank toward the person tightening it with the other hand (avoid sudden jerks that can break the tube and cause accidents).
- When you need to measure the torque of a bolt or nut, use a force scale to check.
3/4"-1" socket connector model 6688A Koken 10301-KOK-0004
The 3/4"-1" socket wrench model 6688A Koken 10301-KOK-0004 is made of high-quality steel, chrome-plated according to international standards, helping users easily convert the 3/4' standard slide wrench to be used with 1' standard socket heads.
1. 6688A Koken socket wrench
The socket wrench is an indispensable item in the process of repairing, assembling or manufacturing machinery, equipment, vehicles... because the socket wrench has high strength, durability, good load-bearing capacity, and is not deformed or warped during use. High-quality steel material, anti-rust, anti-corrosion and resistant to harsh working conditions such as oily and humid environments.
The tube surface is polished and chrome-plated to increase the aesthetics and durability of the product. The tube uses the standard metric system, is manufactured using advanced technology, achieves high precision, ensures aesthetics and long-term durability over time.
Koken 10301-KOK-000 tube connector is compact, flexible, easy to store and maintain management.
2. Shape of the 6688A Koken screw nut connector
The 3/4"-1" screw nut connector model 6688A Koken 10301-KOK-0004 is a harmonious combination that helps users operate easily, limiting the slippery condition when tightening the nut.
Most screw nut connectors are round, with concave notches inside the hole. This concave notch is used to create a connection with the nuts in the connector of the tightening lever, preventing the screw head from falling out of the connector of the tightening lever and making it easy to attach or remove. The corners of the connector are often slightly flared to make it easier to attach to the connector of the tightening lever.
Usually the length of the tube head will be proportional to the size of the connector and the cap, but sometimes the length of the tip will be longer than the length of the tip with the same parameters.
The Koken tube connector is very hard and rust-proof
Note
- Depending on the size of the bolt or nut, choose the appropriate type of tube and based on the height from the place where the bolt or nut is removed to the worker work surface to choose the appropriate length of the connector. When the crank length is not enough, you can install an additional connecting tube, but the connecting tube length must not exceed 500mm.
- To increase the disassembly speed, when the torque is less than 8 kGm, you can use a ratchet wrench to tighten the tube, but when the torque is 8 kGm or more, tighten it with a hard crank to avoid damaging the ratchet wrench.
- When using, the tube must be installed properly, not skewed, and must be close to the bolt or nut. When tightening, hold the crank and the tube or the joint of the connecting rod tightly with one hand, and slowly pull the crank toward the person tightening it with the other hand (avoid sudden jerks that can break the tube and cause accidents).
- When you need to measure the torque of a bolt or nut, use a force scale to check.
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
