Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
KIM TIN G 308 2.5 2.5mm stainless steel welding rod box is suitable for welding medical equipment, household appliances, chemical tanks, civil art structures, stainless steel handrails...
1. Characteristics of 2.5mm stainless steel welding rod box KIM TIN G 308 2.5
- Has bright, smooth welds, easily peels off slag, and is light in electricity
- Smooth explosion sound, little smoke and spatter, stable arc.
- Used in structures that bear heavy loads and are highly abrasion resistant.
KIM TIN G 308 2.5 2.5mm stainless steel welding rod box is suitable for welding stainless steel Austenitic (Stainless steel) types such as E304; E305, E308...with good mechanical properties, high durability and toughness.
2.5mm stainless steel welding rod KIM TIN G 308 is a type of welding rod with high Lime - Titanium coating, designed for Austenitic weld metal with low Hydrogen content, supplemented with a large amount of alloying elements. rarities such as Chromium, Nickel, rare earth... ensure the E308 metal system should be anti-rust, resistant to acid corrosion and have very high mechanical properties.
KIM TIN G 308 2.5mm stainless steel welding rod box 2.5
2. Instructions for use
Prepare fully all labor safety factors before welding. Stable welding source
When the welding rod is damp, the welding is smoky, splashing and unstable, the slag is difficult to peel off, and the weld is porous, it needs to be dried above 200°C for 40 - 60 minutes before use.
Make sure the weld seam gaps and beveled the weld edges according to regulations to achieve a strong weld joint.
Remove impurities such as oil and rust from the surface of the welded object.
Choose the welding current according to the instructions to get a deep penetration weld with high working ability. When welding, always keep the arc as short as possible.
Specifications
- Vietnamese standards: QCVN: 21:2010/BGTVT-D308
- American standard ASME/AWS: E308–16
- Japanese standard JIS: D308–16
- Tensile strength (MPa): 560min
- Liquid limit (MPa): -
- Elongation (%):35 (min)
- Diameter (mm): Ø2.5
- Length (mm): 300
- Welding current (Amperes):
- + Welding degree: 70–90
- + Ceiling and standing welding: 70–80
3. Pay attention to safety when using stainless steel welding rods
Equip yourself with protective clothing, hats, gloves, and protective shoes when working
Welding source: It is necessary to prepare a stable power source for welding to avoid instability, sudden interruptions... affecting work progress, weld quality and minimizing the risk of harm to anyone that may occur. go out.
Stainless steel welding rod Needs to be dry and not moldy. If so, make sure they are dried or dried before use.
To ensure a beautiful weld and meet the required quality, in addition to the welding rod, you also need to make sure the surface of the object being welded is clear, clean, and free of impurities, rust or machine oil...
KIM TIN G 308 2.5 2.5mm stainless steel welding rod box is suitable for welding medical equipment, household appliances, chemical tanks, civil art structures, stainless steel handrails...
1. Characteristics of 2.5mm stainless steel welding rod box KIM TIN G 308 2.5
- Has bright, smooth welds, easily peels off slag, and is light in electricity
- Smooth explosion sound, little smoke and spatter, stable arc.
- Used in structures that bear heavy loads and are highly abrasion resistant.
KIM TIN G 308 2.5 2.5mm stainless steel welding rod box is suitable for welding stainless steel Austenitic (Stainless steel) types such as E304; E305, E308...with good mechanical properties, high durability and toughness.
2.5mm stainless steel welding rod KIM TIN G 308 is a type of welding rod with high Lime - Titanium coating, designed for Austenitic weld metal with low Hydrogen content, supplemented with a large amount of alloying elements. rarities such as Chromium, Nickel, rare earth... ensure the E308 metal system should be anti-rust, resistant to acid corrosion and have very high mechanical properties.
KIM TIN G 308 2.5mm stainless steel welding rod box 2.5
2. Instructions for use
Prepare fully all labor safety factors before welding. Stable welding source
When the welding rod is damp, the welding is smoky, splashing and unstable, the slag is difficult to peel off, and the weld is porous, it needs to be dried above 200°C for 40 - 60 minutes before use.
Make sure the weld seam gaps and beveled the weld edges according to regulations to achieve a strong weld joint.
Remove impurities such as oil and rust from the surface of the welded object.
Choose the welding current according to the instructions to get a deep penetration weld with high working ability. When welding, always keep the arc as short as possible.
Specifications
- Vietnamese standards: QCVN: 21:2010/BGTVT-D308
- American standard ASME/AWS: E308–16
- Japanese standard JIS: D308–16
- Tensile strength (MPa): 560min
- Liquid limit (MPa): -
- Elongation (%):35 (min)
- Diameter (mm): Ø2.5
- Length (mm): 300
- Welding current (Amperes):
- + Welding degree: 70–90
- + Ceiling and standing welding: 70–80
3. Pay attention to safety when using stainless steel welding rods
Equip yourself with protective clothing, hats, gloves, and protective shoes when working
Welding source: It is necessary to prepare a stable power source for welding to avoid instability, sudden interruptions... affecting work progress, weld quality and minimizing the risk of harm to anyone that may occur. go out.
Stainless steel welding rod Needs to be dry and not moldy. If so, make sure they are dried or dried before use.
To ensure a beautiful weld and meet the required quality, in addition to the welding rod, you also need to make sure the surface of the object being welded is clear, clean, and free of impurities, rust or machine oil...
Box of 2.5mm stainless steel welding rods KIM TIN G 308 2.5
KIM TIN G 308 2.5 2.5mm stainless steel welding rod box is suitable for welding medical equipment, household appliances, chemical tanks, civil art structures, stainless steel handrails...
1. Characteristics of 2.5mm stainless steel welding rod box KIM TIN G 308 2.5
- Has bright, smooth welds, easily peels off slag, and is light in electricity
- Smooth explosion sound, little smoke and spatter, stable arc.
- Used in structures that bear heavy loads and are highly abrasion resistant.
KIM TIN G 308 2.5 2.5mm stainless steel welding rod box is suitable for welding stainless steel Austenitic (Stainless steel) types such as E304; E305, E308...with good mechanical properties, high durability and toughness.
2.5mm stainless steel welding rod KIM TIN G 308 is a type of welding rod with high Lime - Titanium coating, designed for Austenitic weld metal with low Hydrogen content, supplemented with a large amount of alloying elements. rarities such as Chromium, Nickel, rare earth... ensure the E308 metal system should be anti-rust, resistant to acid corrosion and have very high mechanical properties.
KIM TIN G 308 2.5mm stainless steel welding rod box 2.5
2. Instructions for use
Prepare fully all labor safety factors before welding. Stable welding source
When the welding rod is damp, the welding is smoky, splashing and unstable, the slag is difficult to peel off, and the weld is porous, it needs to be dried above 200°C for 40 - 60 minutes before use.
Make sure the weld seam gaps and beveled the weld edges according to regulations to achieve a strong weld joint.
Remove impurities such as oil and rust from the surface of the welded object.
Choose the welding current according to the instructions to get a deep penetration weld with high working ability. When welding, always keep the arc as short as possible.
Specifications
- Vietnamese standards: QCVN: 21:2010/BGTVT-D308
- American standard ASME/AWS: E308–16
- Japanese standard JIS: D308–16
- Tensile strength (MPa): 560min
- Liquid limit (MPa): -
- Elongation (%):35 (min)
- Diameter (mm): Ø2.5
- Length (mm): 300
- Welding current (Amperes):
- + Welding degree: 70–90
- + Ceiling and standing welding: 70–80
3. Pay attention to safety when using stainless steel welding rods
Equip yourself with protective clothing, hats, gloves, and protective shoes when working
Welding source: It is necessary to prepare a stable power source for welding to avoid instability, sudden interruptions... affecting work progress, weld quality and minimizing the risk of harm to anyone that may occur. go out.
Stainless steel welding rod Needs to be dry and not moldy. If so, make sure they are dried or dried before use.
To ensure a beautiful weld and meet the required quality, in addition to the welding rod, you also need to make sure the surface of the object being welded is clear, clean, and free of impurities, rust or machine oil...
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
