Add to cart successfully!
Change Payment & Operating
7 days free paymentrefund after 7-14 days
100% genuine product
Brand:
Wacker
Categories brand:
Silicone Caulks & Sealants Wacker
Sold by: AN THÁI KHANG
CODE: 2230588267385
Hotline: 1900 299 918
Specifications
Wacker PA Trans 280ml silicone glue is a one-component acid glue line, and is extracted from 100% imported Silicone glue ingredients. When exposed to air moisture, the product will form a rubber-like plastic to glue and seal damaged areas. The advantage is that it does not lose color during product use.
Wacker PA silicone glue with strong adhesive properties, high elasticity, high temperature resistance,... is always the product of choice for glass and aluminum construction projects, renovation, repair, and filling. locations with high humidity such as bathrooms, pipes, etc. Depending on usage needs and aesthetics.
Instructions for use:
- Surface must be clean, dry, free of dust.
- Cut the tube and pump head, screw them together and place them in the glue gun
- Place the pump head into the contact and inject glue
- The glue will dry in 45 minutes and completely dry after 24 hours.
Wacker PA Trans 280ml silicone sealant
Specifications:
- Density at 23 degrees Celsius: ~1.02 g/cm³
- Consistency: No subsidence
- Flow rate at 23 degrees Celsius: 270 ml/min
- Time to form 50% humidity layer: 5-7 Minutes
- Drying depth per day at 23 degrees Celsius: 3 mm/day
- After 1 week:
- Adhesion strength: 2.1 N/m m²
- Elongation at break: 500%
- Module 100% elongation: 0.52 N/m m²
- After 4 weeks:
- Adhesion strength: 0.7 N/mm²
- Elongation at break: 180%
- Module 100% elongation: 0.5 N/mm²
- Shore A hardness: 23
- Capacity: 280 ml
- Color: Trans
Wacker PA Trans 280ml silicone glue is a one-component acid glue line, and is extracted from 100% imported Silicone glue ingredients. When exposed to air moisture, the product will form a rubber-like plastic to glue and seal damaged areas. The advantage is that it does not lose color during product use.
Wacker PA silicone glue with strong adhesive properties, high elasticity, high temperature resistance,... is always the product of choice for glass and aluminum construction projects, renovation, repair, and filling. locations with high humidity such as bathrooms, pipes, etc. Depending on usage needs and aesthetics.
Instructions for use:
- Surface must be clean, dry, free of dust.
- Cut the tube and pump head, screw them together and place them in the glue gun
- Place the pump head into the contact and inject glue
- The glue will dry in 45 minutes and completely dry after 24 hours.
Wacker PA Trans 280ml silicone sealant
Specifications:
- Density at 23 degrees Celsius: ~1.02 g/cm³
- Consistency: No subsidence
- Flow rate at 23 degrees Celsius: 270 ml/min
- Time to form 50% humidity layer: 5-7 Minutes
- Drying depth per day at 23 degrees Celsius: 3 mm/day
- After 1 week:
- Adhesion strength: 2.1 N/m m²
- Elongation at break: 500%
- Module 100% elongation: 0.52 N/m m²
- After 4 weeks:
- Adhesion strength: 0.7 N/mm²
- Elongation at break: 180%
- Module 100% elongation: 0.5 N/mm²
- Shore A hardness: 23
- Capacity: 280 ml
- Color: Trans
Specifications
Specifications
Product description
Keo silicon 280ml Wacker PA Trans
Keo silicon 280ml Wacker PA Trans
Wacker PA Trans 280ml silicone glue is a one-component acid glue line, and is extracted from 100% imported Silicone glue ingredients. When exposed to air moisture, the product will form a rubber-like plastic to glue and seal damaged areas. The advantage is that it does not lose color during product use.
Wacker PA silicone glue with strong adhesive properties, high elasticity, high temperature resistance,... is always the product of choice for glass and aluminum construction projects, renovation, repair, and filling. locations with high humidity such as bathrooms, pipes, etc. Depending on usage needs and aesthetics.
Instructions for use:
- Surface must be clean, dry, free of dust.
- Cut the tube and pump head, screw them together and place them in the glue gun
- Place the pump head into the contact and inject glue
- The glue will dry in 45 minutes and completely dry after 24 hours.
Wacker PA Trans 280ml silicone sealant
Specifications:
- Density at 23 degrees Celsius: ~1.02 g/cm³
- Consistency: No subsidence
- Flow rate at 23 degrees Celsius: 270 ml/min
- Time to form 50% humidity layer: 5-7 Minutes
- Drying depth per day at 23 degrees Celsius: 3 mm/day
- After 1 week:
- Adhesion strength: 2.1 N/m m²
- Elongation at break: 500%
- Module 100% elongation: 0.52 N/m m²
- After 4 weeks:
- Adhesion strength: 0.7 N/mm²
- Elongation at break: 180%
- Module 100% elongation: 0.5 N/mm²
- Shore A hardness: 23
- Capacity: 280 ml
- Color: Trans
Check and report shipping costs
Change Payment & Operating
7 days free paymentrefund after 7-14 days
100% genuine product
Keo silicon 280ml Wacker PA Trans
60.500 đ
Buy now
