Add to cart successfully!
7 days free paymentrefund after 7-14 days
100% genuine product
Heat-resistant silicone glue 300ml This type of glue is suitable for construction on most types of materials, materials with low shrinkage, no sagging, acetic acid curing system, reaches stability after about 30 minutes and dries completely to a thickness of 10mm in within 7 days.
Heat-resistant gasket adhesive is also used for gaskets and sealing in locations subject to high temperatures; sealing and caulking industrial furnaces; making gaskets for industrial gas cylinders; Assembling glass, metal-ceramic coating, epoxy and polyester panels, polystyrene, anodized aluminum, finished metal and finished wood.
The limitation of RTV 650°F Red is that it is an acetic acid curing sealant, so it is not suitable for use in locations where the acetic acid component can corrode the base material; Cannot be painted on the surface; Do not use on PE, PP, PTFE and Bitumen surfaces; Do not use in direct contact with gasoline.
Specifications:
- Curing system: Acetoxy
- Appearance: Paste type
- Smell: Sour vinegar smell
- Density: 1.01 ± 0.03
- Hardness: Shore A >20
- Stretch: >300%
- Tensile strength: >1.00 Mpa
- Construction time: 5 minutes
- Stabilization time: 30 minutes
- Construction temperature: -20°C - 50°C
- Continuous use temperature: -40°C - 343°C
- Intermittent use temperature: -40°C - 343°C
How to use X'traseal 650°F Red glue:
- Remove old glue from the surface.
- Clean with solvent and let surface dry before applying.
- Cut nozzle to desired size.
- Extrude glue evenly in positions and around bolt holes.
- Assembled within 5 minutes.
- Tighten to the required level, do not over-tighten.
- Clean off excess glue with MEK or Toluene.
Heat-resistant silicone glue 300ml This type of glue is suitable for construction on most types of materials, materials with low shrinkage, no sagging, acetic acid curing system, reaches stability after about 30 minutes and dries completely to a thickness of 10mm in within 7 days.
Heat-resistant gasket adhesive is also used for gaskets and sealing in locations subject to high temperatures; sealing and caulking industrial furnaces; making gaskets for industrial gas cylinders; Assembling glass, metal-ceramic coating, epoxy and polyester panels, polystyrene, anodized aluminum, finished metal and finished wood.
The limitation of RTV 650°F Red is that it is an acetic acid curing sealant, so it is not suitable for use in locations where the acetic acid component can corrode the base material; Cannot be painted on the surface; Do not use on PE, PP, PTFE and Bitumen surfaces; Do not use in direct contact with gasoline.
Specifications:
- Curing system: Acetoxy
- Appearance: Paste type
- Smell: Sour vinegar smell
- Density: 1.01 ± 0.03
- Hardness: Shore A >20
- Stretch: >300%
- Tensile strength: >1.00 Mpa
- Construction time: 5 minutes
- Stabilization time: 30 minutes
- Construction temperature: -20°C - 50°C
- Continuous use temperature: -40°C - 343°C
- Intermittent use temperature: -40°C - 343°C
How to use X'traseal 650°F Red glue:
- Remove old glue from the surface.
- Clean with solvent and let surface dry before applying.
- Cut nozzle to desired size.
- Extrude glue evenly in positions and around bolt holes.
- Assembled within 5 minutes.
- Tighten to the required level, do not over-tighten.
- Clean off excess glue with MEK or Toluene.
X'traseal 650°F Red Heat Resistant Silicone Sealant 300ml
Heat-resistant silicone glue 300ml This type of glue is suitable for construction on most types of materials, materials with low shrinkage, no sagging, acetic acid curing system, reaches stability after about 30 minutes and dries completely to a thickness of 10mm in within 7 days.
Heat-resistant gasket adhesive is also used for gaskets and sealing in locations subject to high temperatures; sealing and caulking industrial furnaces; making gaskets for industrial gas cylinders; Assembling glass, metal-ceramic coating, epoxy and polyester panels, polystyrene, anodized aluminum, finished metal and finished wood.
The limitation of RTV 650°F Red is that it is an acetic acid curing sealant, so it is not suitable for use in locations where the acetic acid component can corrode the base material; Cannot be painted on the surface; Do not use on PE, PP, PTFE and Bitumen surfaces; Do not use in direct contact with gasoline.
Specifications:
- Curing system: Acetoxy
- Appearance: Paste type
- Smell: Sour vinegar smell
- Density: 1.01 ± 0.03
- Hardness: Shore A >20
- Stretch: >300%
- Tensile strength: >1.00 Mpa
- Construction time: 5 minutes
- Stabilization time: 30 minutes
- Construction temperature: -20°C - 50°C
- Continuous use temperature: -40°C - 343°C
- Intermittent use temperature: -40°C - 343°C
How to use X'traseal 650°F Red glue:
- Remove old glue from the surface.
- Clean with solvent and let surface dry before applying.
- Cut nozzle to desired size.
- Extrude glue evenly in positions and around bolt holes.
- Assembled within 5 minutes.
- Tighten to the required level, do not over-tighten.
- Clean off excess glue with MEK or Toluene.
7 days free paymentrefund after 7-14 days
100% genuine product
Buy now
