Add to cart successfully!
Change Payment & Operating
7 days free paymentrefund after 7-14 days
100% genuine product
Brand:
HELI
Categories brand:
Forklifts & Forklift Attachments HELI
Sold by: TAT Mall
CODE: 2059443941068
Hotline: 1900 299 918
Specifications
Heli CPD18-GC1/GC2 48V-480Ah sit-down forklift operates more stably and safely with the new type of drive axle; thanks to the small front overhang design. The column buffer, rear axle buffer and rear expansion valve control knob increase operating comfort. The forklift is longitudinal stability increases by 4.9%; installing a high rear axle increases lateral stability by 2.1%. Lifting efficiency increased by 21%, climbing ability increased by 20% and steering also increased by 7%.
The vehicle has a lifting capacity of 1,800kg, a load center of 500mm with a lifting height of 3,000-7,000mm. Compact forklift design, minimum turning radius of 1,800mm, 4 wheels for mobile movement, can be stacked in containers. Loaded moving speed 15km/h, loaded lifting speed 280mm/s.
Standard configuration, slim design easy to handle in any workspace for high performance. No exhaust, low noise, environmentally friendly and suitable for working conditions inside the warehouse, outside the warehouse and even cold storage.
The vehicle can automatically decelerate while driving to improve safety (optional), special side panels and top cover structure are easy to assemble and disassemble. Moving performance saves more than 10% energy. Ratchet handbrake creates comfortable driving conditions.
Curtis (USA) or Zapi (Italy) control board makes operation easy and convenient. The vehicle is equipped with 2 AC electric motors for operations: DC lifting motor - 8.6 kW provides safe and stable lifting and lowering; AC moving motor - 8.2 kW provides good traction and mobility.
The CAN-BUS connection system equipped on the vehicle helps to perform operations in the most optimal way, without delay and the operator can observe the device well. CAN-BUS helps to reduce connection wires, signal transmission speed is faster and more accurate.
Heli CPD18-GC1/GC2 48V-480Ah sit-down forklift operates more stably and safely with the new type of drive axle; thanks to the small front overhang design. The column buffer, rear axle buffer and rear expansion valve control knob increase operating comfort. The forklift is longitudinal stability increases by 4.9%; installing a high rear axle increases lateral stability by 2.1%. Lifting efficiency increased by 21%, climbing ability increased by 20% and steering also increased by 7%.
The vehicle has a lifting capacity of 1,800kg, a load center of 500mm with a lifting height of 3,000-7,000mm. Compact forklift design, minimum turning radius of 1,800mm, 4 wheels for mobile movement, can be stacked in containers. Loaded moving speed 15km/h, loaded lifting speed 280mm/s.
Standard configuration, slim design easy to handle in any workspace for high performance. No exhaust, low noise, environmentally friendly and suitable for working conditions inside the warehouse, outside the warehouse and even cold storage.
The vehicle can automatically decelerate while driving to improve safety (optional), special side panels and top cover structure are easy to assemble and disassemble. Moving performance saves more than 10% energy. Ratchet handbrake creates comfortable driving conditions.
Curtis (USA) or Zapi (Italy) control board makes operation easy and convenient. The vehicle is equipped with 2 AC electric motors for operations: DC lifting motor - 8.6 kW provides safe and stable lifting and lowering; AC moving motor - 8.2 kW provides good traction and mobility.
The CAN-BUS connection system equipped on the vehicle helps to perform operations in the most optimal way, without delay and the operator can observe the device well. CAN-BUS helps to reduce connection wires, signal transmission speed is faster and more accurate.
Specifications
Specifications
Product description
48V-480Ah Heli CPD18-GC1/GC2 Sit-Down Forklift
48V-480Ah Heli CPD18-GC1/GC2 Sit-Down Forklift
Heli CPD18-GC1/GC2 48V-480Ah sit-down forklift operates more stably and safely with the new type of drive axle; thanks to the small front overhang design. The column buffer, rear axle buffer and rear expansion valve control knob increase operating comfort. The forklift is longitudinal stability increases by 4.9%; installing a high rear axle increases lateral stability by 2.1%. Lifting efficiency increased by 21%, climbing ability increased by 20% and steering also increased by 7%.
The vehicle has a lifting capacity of 1,800kg, a load center of 500mm with a lifting height of 3,000-7,000mm. Compact forklift design, minimum turning radius of 1,800mm, 4 wheels for mobile movement, can be stacked in containers. Loaded moving speed 15km/h, loaded lifting speed 280mm/s.
Standard configuration, slim design easy to handle in any workspace for high performance. No exhaust, low noise, environmentally friendly and suitable for working conditions inside the warehouse, outside the warehouse and even cold storage.
The vehicle can automatically decelerate while driving to improve safety (optional), special side panels and top cover structure are easy to assemble and disassemble. Moving performance saves more than 10% energy. Ratchet handbrake creates comfortable driving conditions.
Curtis (USA) or Zapi (Italy) control board makes operation easy and convenient. The vehicle is equipped with 2 AC electric motors for operations: DC lifting motor - 8.6 kW provides safe and stable lifting and lowering; AC moving motor - 8.2 kW provides good traction and mobility.
The CAN-BUS connection system equipped on the vehicle helps to perform operations in the most optimal way, without delay and the operator can observe the device well. CAN-BUS helps to reduce connection wires, signal transmission speed is faster and more accurate.
Check and report shipping costs
Change Payment & Operating
7 days free paymentrefund after 7-14 days
100% genuine product
48V-480Ah Heli CPD18-GC1/GC2 Sit-Down Forklift
345.000.000 đ
Buy now
