Add to cart successfully!
Change Payment & Operating
7 days free paymentrefund after 7-14 days
100% genuine product
Brand:
HELI
Categories brand:
Forklifts & Forklift Attachments HELI
Sold by: TAT Mall
CODE: 2080377439542
Hotline: 1900 299 918
Specifications
Heli CPD20-GC1/GC2 48V-600Ah sit-down forklift has a lifting capacity of 2,000kg, a load center of 500mm with a lifting height of 3,000-7,000mm. The forklift is compactly designed, with a minimum turning radius of 2,000mm, 4 wheels for maneuverability, and can be stacked in containers. Loaded moving speed of 15km/h, loaded lifting speed of 490mm/s, and 20% slope climbing ability.
The vehicle operates more stably and safely with a new type of drive shaft; thanks to the small forward overhang design. The mast buffer, rear axle buffer and rear extended valve control knob increase operating comfort. The forklift is longitudinal stability increases by 4.9%; installing a high rear axle increases lateral stability by 2.1%. Lifting performance increases by 21%, climbing ability increases by 20% and steering also increases by 7%.
Standard configuration, slim design easy to handle in any workspace for high performance. No exhaust, low noise, environmentally friendly and suitable for working conditions inside the warehouse, outside the warehouse and even cold storage. The vehicle can automatically decelerate while driving to improve safety (optional), special side panels and top cover structure are easy to assemble and disassemble. Moving performance saves more than 10% energy.
Curtis (USA) or Zapi (Italy) control board makes operation easy and convenient. The vehicle is equipped with 2 AC electric motors for operations: DC lifting motor - 10.5 kW provides safe and stable lifting and lowering; AC moving motor - 11.5 kW provides good traction and mobility.
The CAN-BUS connection system equipped on the vehicle helps to perform operations in the most optimal way, without delay and the operator can observe the device well. CAN-BUS helps to reduce connection wires, signal transmission speed is faster and more accurate.
Heli CPD20-GC1/GC2 48V-600Ah sit-down forklift has a lifting capacity of 2,000kg, a load center of 500mm with a lifting height of 3,000-7,000mm. The forklift is compactly designed, with a minimum turning radius of 2,000mm, 4 wheels for maneuverability, and can be stacked in containers. Loaded moving speed of 15km/h, loaded lifting speed of 490mm/s, and 20% slope climbing ability.
The vehicle operates more stably and safely with a new type of drive shaft; thanks to the small forward overhang design. The mast buffer, rear axle buffer and rear extended valve control knob increase operating comfort. The forklift is longitudinal stability increases by 4.9%; installing a high rear axle increases lateral stability by 2.1%. Lifting performance increases by 21%, climbing ability increases by 20% and steering also increases by 7%.
Standard configuration, slim design easy to handle in any workspace for high performance. No exhaust, low noise, environmentally friendly and suitable for working conditions inside the warehouse, outside the warehouse and even cold storage. The vehicle can automatically decelerate while driving to improve safety (optional), special side panels and top cover structure are easy to assemble and disassemble. Moving performance saves more than 10% energy.
Curtis (USA) or Zapi (Italy) control board makes operation easy and convenient. The vehicle is equipped with 2 AC electric motors for operations: DC lifting motor - 10.5 kW provides safe and stable lifting and lowering; AC moving motor - 11.5 kW provides good traction and mobility.
The CAN-BUS connection system equipped on the vehicle helps to perform operations in the most optimal way, without delay and the operator can observe the device well. CAN-BUS helps to reduce connection wires, signal transmission speed is faster and more accurate.
Specifications
Specifications
Product description
48V-600Ah Heli CPD20-GC1/GC2 Sit-Down Forklift
48V-600Ah Heli CPD20-GC1/GC2 Sit-Down Forklift
Heli CPD20-GC1/GC2 48V-600Ah sit-down forklift has a lifting capacity of 2,000kg, a load center of 500mm with a lifting height of 3,000-7,000mm. The forklift is compactly designed, with a minimum turning radius of 2,000mm, 4 wheels for maneuverability, and can be stacked in containers. Loaded moving speed of 15km/h, loaded lifting speed of 490mm/s, and 20% slope climbing ability.
The vehicle operates more stably and safely with a new type of drive shaft; thanks to the small forward overhang design. The mast buffer, rear axle buffer and rear extended valve control knob increase operating comfort. The forklift is longitudinal stability increases by 4.9%; installing a high rear axle increases lateral stability by 2.1%. Lifting performance increases by 21%, climbing ability increases by 20% and steering also increases by 7%.
Standard configuration, slim design easy to handle in any workspace for high performance. No exhaust, low noise, environmentally friendly and suitable for working conditions inside the warehouse, outside the warehouse and even cold storage. The vehicle can automatically decelerate while driving to improve safety (optional), special side panels and top cover structure are easy to assemble and disassemble. Moving performance saves more than 10% energy.
Curtis (USA) or Zapi (Italy) control board makes operation easy and convenient. The vehicle is equipped with 2 AC electric motors for operations: DC lifting motor - 10.5 kW provides safe and stable lifting and lowering; AC moving motor - 11.5 kW provides good traction and mobility.
The CAN-BUS connection system equipped on the vehicle helps to perform operations in the most optimal way, without delay and the operator can observe the device well. CAN-BUS helps to reduce connection wires, signal transmission speed is faster and more accurate.
Check and report shipping costs
Change Payment & Operating
7 days free paymentrefund after 7-14 days
100% genuine product
48V-600Ah Heli CPD20-GC1/GC2 Sit-Down Forklift
375.000.000 đ
Buy now
